
A new design based on PNYSER48 series, PNYSRA4X series can commodate up to 10 double-width GPU boards and has an 11th slot to the rear of the chassis, allowing a single-width PCIe x16 card to be installed. This new design change is ideal for NVMe deployment or high speed networking like 100 Gigabit EDR Infiniband, 100 Gigabit Ethernet, or 100 Gigabit Intel Omni-Path fabric. Furthermore, an internal storage mezzanine slot (for SAS storage deployment without taking up PCIe slots) is also available for integrating device controller solutions.
As a single-root complex GPU server, PNYSRA4X series deploys a set of two PLX® PEX8796 PCIe switch chips to provide direct connectivity between one single CPU and 10 GPU boards (PCIe x16 slots) and an high-speed network card (PCIe x16 slot). For Deep Learning applications, this design allows data exchanges and instruction signals to be assembled/dispatched more efficiently (between the CPU, the 10 GPU boards and the high-speed network card), both on the hardware level (single or multiple nodes) and in the Deep Learning framework. This also translates into better conservation of precious CPU compute resources (on the 2nd CPU) for faster workload processing (either on different threads apart from the 1st CPU or in collaboration with the 1st CPU).
Featuring AMI MegaRAC® firmware, PNYSRA4X series offers support for IPMI 2.0 with iKVM and the DMTF Redfish management protocol. The MegaRAC® SP-X SoC (System-on-Chips) has an AMI generic, user-friendly Graphics User Interface (GUI) called the MegaRAC® GUI. It is designed to be easy to use. It has a low learning curve because it uses a standard Internet browser. You can expect to be up and running in less than five minutes.
PNYSRA4X series is built around Intel Skylake CPU architecture - ‘Intel® Xeon® Scalable’. This new product family provides a wealth of new options in scalability - across compute, network and storage - to deliver solutions for a range of applications.
Intel® Xeon® Scalable CPU architecture brings improved features and functionality at both the host and fabric levels. These enable performance improvements - both natively on the chip and for future extensibility through compute, network and storage peripherals.
Intensive and fast algorithmic computing, such as volume rendering, data-parallel vector calculation, multi-layer data linearity transformation, molecular fragments modeling.
High data training and validation iterations for linear and non-linear complex features with multiple processing layers and parameters; rapid object detection and parsing.
One-stop-shop GPU server solutions with PNY.
Global Partner network. Local Resources.
Advanced RMA:
Same-day parts shipment
Next-business-day on-site hardware maintenance
Multilingual phone support hotline
Fast turnaround of components via efficient SCM
Dimensions | 4U 770 x 438 x 176 (D x W x H, mm) |
CPU | Intel® Xeon® Processor Scalable Family Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor CPU TDP up to 205W Up to 10.4/9.6 GT/s with Intel UltraPath Interconnect (UPI) support NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable |
Socket | 2 x LGA 3647 |
Chipset |
PCH Intel® C621 Express Chipset
Switch IC: 2 x PLX PEX8796
|
Memory |
Supported DIMM: 24 x DIMM slots
DIMM Type / Speed: DDR4 RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 2666
Capacity: Up to 768GB RDIMM/ 1,536GB LRDIMM/ 3,072GB RDIMM 3DS/LRDIMM 3DS *Follow latest Intel DDR4 Memory POR
Memory Channel: 6 channels per CPU
Memory Voltage: 1.2V
|
LAN |
Port: 2 x 10GbE ports / 1 x GbE port dedicated for IPMI
Controller: Intel X550-AT2
PHY: Realtek RTL8211E
|
Video |
Connector Type: D-Sub 15-pin
Resolution: Up to 1920x1200
Chipset: Aspeed AST2500
|
External Drive Bays |
Type: 14 x 2.5" Hot-Swap HDD/SSD bays (with optional support for 4 x NVMe U.2 drives; additional controller card required)(with optional support for 4 x 3.5" drives)
Backplane Support: SAS 12Gb/s /SATA 6Gb/s
Default supported HDD Interface: 14 x SATA 6Gb/s
|
Storage |
SATA Connector: 2 x Mini-SAS HD (8-ports)
Controller: Intel C621
Speed: 6.0 Gb/s
RAID: S/W RAID 0/1/10/5 (Intel RSTe)
sSATA Connector: 2 x SATA III / 1 x Mini-SAS HD (4-ports)
Speed: 6.0 Gb/s
RAID: S/W RAID 0/1/10/5 (Intel RSTe)
|
SAS | Supported via add-on SAS Card (see below "Expansion Slots") |
SATA | 14 x SATA 6Gb/s |
RAID | According to the RAID card option implemented |
Expansion Slots |
PCIe: 11 x FH FL PCIe Gen3 x16 slots + 1 x PCIe Gen3 x16 Proprietary Mezzanine slot
Pre-install Internal OCP Riser Card: 1 x M2217-L16-IO (for internal SAS controller card)
|
Front Panel |
Buttons: 1 x RST / 1 x ID / 1 x PWR w/ LED
LEDs: 1 x HDD / 1 x ID / 1 x Warning / 3 x LAN
I/O Ports: 1 x VGA port / 2 x USB 3.0 port / 1 x COM Port
|
I/O Ports |
USB: 2 x USB3.0 ports (at rear) / 2 x USB3.0 ports (at front)
COM: 1 x DB-9 COM port (at front)
VGA: 1 x D-Sub 15-pin port
RJ-45: 1 x GbE port dedicated for IPMI
|
TPM | 1 x TPM header with LPC interface Optional TPM 1.2/2.0 kits available |
Power Supply |
Type: Redundant PSU
Input Range: AC 100-127V/12.9A / AC 200-240V/9.5A
Frequency: 47-63 Hz
Output Watts: 3,000 Watts (100-127Vac input) / 4,800Watts (200-240Vac input)
Efficiency: PFC / 80 plus Platinum
Redundancy: 3+1
|
System Monitoring |
Chipset: Aspeed AST2500
Temperature: Monitors temperature for CPU & memory & system environment
Voltage: Monitors voltage for CPU, memory, chipset & power supply
LED: Over temperature warning indicator / Fan & PSU fail LED indicator
Others: Watchdog timer support
|
System Management |
Onboard Chipset Onboard: Aspeed AST2500
AST2500 iKVM Features: IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2500 IPMI Features: 24-bit high quality video compression / 10/100/1000 Mb/s MAC interface
|
BIOS |
Brand / ROM Size: AMI / 32MB
Features: Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1
|
OS Supported |
Windows Server 2016 x64 |
Weight | 45 kg (full package) |
Packaging Content | 1 x PNYSRA4X000000-100 1 x Quick installation guide 2 x CPU heatsinks 1 x Rail kit |
System Fans |
(5+1) x 12cm redundant hot-swappable fans |
Operating Properties |
Operating Temperature: 10°C ~ 35°C (50°F~ 95°F)
Non-operating Temperature: - 40°C ~ 70°C (-40°F ~ 158°F)
In/Non-operating Humidity: 90%, non-condensing at 35°C
|